PC 62xx 10Gb option
Can these use a SFP+ DAC cable? I'm trying to save some $$$ reconfiguring our core to connect to some new IBM G8124e and Meraki MS42 gear.
View ArticlePC8164
Hi I saw the " Failed to alloc for reassem" message on PC8164. Can anyone tell me what the log means? Thanks, The switch firmware is v5.1.1.7 Memory Utilization Report status bytes ------ ----------...
View ArticlePowerconnect 5224 Boot rom ver. 1.0.05
Can any body have the Boot rom ver. 1.0.0.5 for powerconnect 5224 or point me to where I can download? I upgrade to the latest firmware but it fail the diagnotic test with the old boot rom ver 1.0.0.0...
View ArticlePowerConnect 3548 - NO Connection to CLI
Hi,i want to reset the 3548 to the factory defaults, because someone deleted the IP-configuration of the VLAN 1. So I can't connect to the switch by http. I connected via RS232 an Hyper-Terminal to the...
View ArticleVLANS on 7048
Hello,We are trying to migrate our infrastructure to Dell 7048 switches and the basic question has to do with VLANs.We have the default VLAN 1 as 192.168.3.x. The firewall / gateway is set as...
View ArticlePowerConnect 5212 firmware version retrograde?
Hi,I have a PowerConnect 5212. I got system firmware version 3.1.0.15 in June of 2004, installed it and it's fine. I started at Operation Code version 1.0.0.5. Now when I look for updates on the...
View ArticleDell 6224 Master/stacking Second switch wont pickup
Dell 6224 Master/stacking Second switch wont pickupI have my primary switch being set as master and works fine, the second switch fails to pickup a secondary and cannot see the first master.
View ArticlePowerconnect 6248 sflow sampling limit
So we are running a bunch of Dell Power Edge 6248 switches in our enterprise (about 14 in our two core stacks) and a few other edge switches, all up to firmware version 3.3.5.5.My problem is the...
View ArticleTriple Switches Dell 6248 stacked LAgging
I have triple switches stacked. I was wondering if its possible to setup link agression accross different ports on the three swithceseg switch 1 port 2 lag with switch 2 port 2 and so on.
View ArticlePowerconnect2824 Managed Mode Problem
Hello,I've the following problem with my switch.I get the following error in managed mode. %OS-F-MEMORY: OSMEMG_rn_free: Memory magic is invalid******FATAL ERROR *****Reporting Task: POLI.Software...
View ArticleTrying to gain access to 3 Dell switches - 1 5212 & 2 5324
I have 1 PowerConnect 5212, & 2 5324 switches that the previous admin left no configuration information for (at least they had the IP labeled on the front). Tried reaching out to previous admin, no...
View Article8132F OOB support VLAN?
Hi,I am checking the OOB configuration for 8132F. Does it support VLAN setup? or any other methods if I want it can access under VLAN environment? Thanks!
View ArticlePC 6248 - management interface (HTTPS, SSH) problem.
Hello,I have an issue on my DELL Powerconnect 6248 with the management interface. I have configured SSH and HTTPS, it worked few days without problem, but now I can't access it.My switch works fine...
View ArticleEnable the SSH server on a PC6248
Hi, I'd like to enable the SSH server on a PC6248. From the CLI, I tried:# config(config) # ip ssh serverSSH could not be enabled. Nothing happens in the RAM Log. What are the required steps to enable...
View ArticleStacking Modules
Hello, I am running 2 PowerConnect 6248's and require stacking modules.Will Dell 10G Dual Port Stack Adapter, Stacking Module, UY108 work with the PC6248's?How about the DELL 10G CX4 Fibre Stacking...
View Articlelongest stacking cable?
I see Dell part numbers for a 1m and 3m stacking cable for 62xx; can a 15m 10GBase-CX4 spec cable be used for stacking?
View ArticleGet hidden original IP address of stack member
Given two 8164 Switches, Switch A has VLAN1 IP 10.10.10.1 and switch B has VLAN1 IP 10.10.10.2. Now we create a stack between the two and let the switch A become master. Voila - the stack is reachable...
View ArticleNeed help configuring Vlan
Hi All,I need some help. I need to configure a stack of Powerconnect 3524P switches for the following scenario:The environment is a single network drop environment (one cable from the switch to the...
View ArticleRegarding VLAN implementation
For testing:- I put 2 machines on different port of L3 Switch.Machine 1 IP --> 172.16.9.10 /16 (Switch Port - 1g/2) (VLAN 10)Machine 2 IP --> 192.168.11.19 /24 (Switch Port - 1g/24) (VLAN 11)-...
View ArticleNeed Multiple Subnet in Pair of 6348 on Chassis M1000e
Hi,I have some query about switching on pair of 6348 switches on my Blade Chassis M1000e.Currently we have one network uplink to these both switches of network 172.28.1.X and it connect to all 16 Blade...
View Article