Dell System Hardware & Software Updates for September 21 - 25, 2015
Popular DownloadsDell Server E-Support Tool (DSET) 3.7 for Dell serversDell Support Live Image (SLI) 2.2OpenManage Server Administrator (OMSA) 8.1OpenManage Essentials (OME) 2.10Servers &...
View Article6248P VOIP And Trunk Issue
Hi,I am swapping out a old Linksys switch that has our phones and I am looking to VLAN our phones and PCs on the 6248P switch.I have setup the 6248P to have VLAN1 as PC's and VLAN101 as the Voice....
View ArticlePowerConnect 6248 Esxi 5.5 and VLAN's
Hi,I'm having trouble setting up a network with 3 vlan's using esxi 5.5 and a PowerConnect 6248 switch.Basically I need:Vlan 1: 192.168.10.x/24Vlan 20: 192.168.20.x/24Vlan 30: 192.168.1.x/24Internet...
View ArticleClik here to view.
PowerConnect 6248, Esxi 5.5 and VLAN's Help
Hi,I need some help setting up this VLAN network. I've got 1 ESXI 5.5 host and PowerConnect 6248 switch and 3 VLAN's.VLAN 1: 192.168.10.x/24VLAN 2: 192.168.20.x/24VLAN 3: 192.168.1.x/24Internet Router:...
View ArticleFirefox will not browse PowerConnect 3254
Hello,Whenever I try and browse to my PowerConnect 3254 via HTTPs my FireFox returns the following error:Secure Connection FailedAn error occurred during a connection to 192.x.y.z. The server...
View ArticleDell Powerconnect 5548 Port Channel Bandwidth
I have created a switch mesh using Dell Powerconnect 5548s with port-channels built across them. 2 1Gb interfaces per port-channel. How can I verify that the throughput is 2GB for the port-channel?...
View ArticleHow to Reboot/Restart Dell Powerconnect 6224
Hi,My company have 2 powerconnect 6224, 1 is master and 1 is slave, may i know how could i restart/reboot my switch in GUI?Can i use cli command to restart/reboot and what is the command line.Thanks
View ArticleDell Switch 6248 - cannot connect to firewall with configuration
I have it so the Vlan's can talk to each other, the tracert shows that they're going through the correct default gateway's. The issue I'm having is that on port 47, I have the wifi firewall connected...
View ArticleClik here to view.
Issue with missing , delayed multicast packets
HiI have an OSPF networking over VLAN19. I had quite a few networking issues as the OSPF network flaps due to neighbors dying, because of lost heartbeatsThis is what got me looking at it. DCFW1 is the...
View ArticleSFP+ Cable model for PC5524.
I wonder which Dell cables for link between two PC 5524. I plan to link between 2 racks distance around 10m.Thanks,Chutima S.
View ArticleDell 62XX Firmware 3.3.13.1.A38 Problem
All, we upgraded several Dell 62XX switches (6224, 6224F, 6248) to firmware 3.3.13.1.A38 and discovered a problem where when cold booting a non-stacked switch, the firmware failed to start the network...
View ArticlePowerconnect 2708 VLAN Setup Help
I have a rather basic need which I seem to be missing a key step in order to get this working. I have two subnets connected to a single 2708 switch. Within those subnets certain IP's or Ports must be...
View ArticleDell 8132 Powerconnect stack configuration change
Hello,We have two Dell 8132 Powerconnect switches stacked using 8 10Gig ports on each switch. Now all the remaining ports on the two switches are occupied and we are running short of additional free...
View ArticleOMNM OS memory utilization
Is it possible to limit the Java memory utilization for OpenManage Network Manager?
View ArticleNon-qualified optics message from N4032F
I recently received a N4032F and installed 12 RJ-45 transceivers (FCLF8521-3-(DL)).When I powered up the switch I received the following message on all of the ports that the copper transceivers were...
View ArticleHow do I get upgrades for my Force10 unit?
I bought a Force10 Dell branded switch from someone on eBay.When I print out the version information the service code and serial don't seem to be workable on any part of Dell's site.Where do I go to...
View ArticlePowerConnect 3524 VLAN help.
I have inherited the administration of a PowerConnect 3524P. We had to reset it to factory as the prior admin left no credentials. I have never used Dell switches before (used to Netgear or Ubiquiti...
View ArticleSTACK PRIORITY SWITCHS N3024
Hello all!Is there a command or specific configuration to set the master switch in a stack cenario ? On CLI there is not a option to set stack priority.Thanks!
View ArticleMTU Mix
Good moring,I have a question does the MTU size works by port or by unit (all the switch), the question goes because looking on different post on internet some say the MTU is by unit and other by port,...
View ArticleClik here to view.
How to measure traffic quantity?
Hello^^Actually the question what I say is different from other questions that people make inquires.Nevertheless, I want to know my question because there's no person who teach me...From old times, I...
View Article