2848 hangs at "unit standalone", managed led is blinking
Hi,PowerConnect 2848 powers on but does not boot, hangs at UNIT STANDALONE", 192.168.2.1 does not respond. It can be a hardware issue but I would like to try reflashing via xmodem - it is a last hope,...
View ArticleW-650 controller access points
Have a W-650 controller and iap205 access points. Dell no longer sells the iap105 and want to know if the aruba iap205 will work with the dell controller and our current dell iap105 access points.Have...
View ArticleSpanning-tree question
I have a core of stack of 4 PowerConnect 7048 switches. There are some unacceptable delays on the network so I am cleaning up configurations and checking spanning-tree as these were configured by he...
View ArticleClik here to view.
Dell PowerConnect 7024 unit 0 L3_ENTRY_ONLY entry 16179 parity error?!?!...
Just today I noticed that a continuous stream of errors are showing up on our PowerConnect 7024's RAM log. Here's a screenshot:Any help would be greatly appreciated! Can't find ANYTHING on Google...
View Articlelive removal of stack module
Hi,We have 2 PowerConnect 6248 which are stacked. We need our stack module for our new setup but we can't shutdown this production environnement yet.It is possible to remove stack module of our switch...
View ArticleDell X1052 10Gbps sfp+ question
Hey,I Am interested in purchasing a dell x1052 switch but i have a few questions regarding its functionality.1. Can i aggregate the sfp+ ports on this switch? basically i want to lacp 2 of the 10gbps...
View ArticleClik here to view.
Communicating different VLAN using MSTP.
Hi all, I'm a beginner engineer, so I have a little knowledge.I tried to configure by myself, but some problem was bothering me..I want you guys to help me!! Actually I configured MSTP using the 4...
View ArticleWarranty on Used X-series switch
Hey,I am interested in purchasing a Dell x1052 x-series switch. But had a question on it regarding warranty. I know that buying used laptops the warranty can be transferred over to the new owner. So,...
View ArticleVLAN N3024 Switches
Hi, would someone be able to help me please :-) I have a Dell N3024 in Location A.I have a stacked Dell N3024 and N3024F in Location B.I have VLAN'd the switches 2 create 2 VLANs:VLAN ID = 2, Name:...
View ArticleMonitor N2000 Stack Status
Is there an SNMP OID that lets me monitor the status of all stack members?
View ArticlePowerconnect 6224 stopped routing last night
I have a couple Powerconnect 6224 and I do Vlan routing with one of them acting as the default Vlan route. This has been working for a couple year now and then this morning I could not access anything...
View ArticleDifference between switchport General and Trunk
Hello,I've read through the user guide, "Networking Best Practices - Connecting Two Switches", and "PowerConnect Common Questions Between Access, General and Trunk mode" but I'm still unsure about the...
View ArticleN4032F & N3048P SFP+ ports with Dell Qualified SFP 1000Base-SX optics and...
I have a combination of the above Dell N-Series along with some Ciena and Extreme equipment and there have been some issues with configuration. Connecting either of the above N-Series to the Ciena and...
View ArticleNAC with Powerconnect 7048
Hello all,I have a dell a powerconnect switch 7048 that i want to integrate with cisco ISE and the client wants to be sure that our dell powerconnect switch 7048 will support the configurations. please...
View ArticleEnabling/Configuring STP on PowerConnect 2848
Hello all, I have purchased 4 2848 switches and I logged into them to configure the STP so they all play nice together. It would seem that STP is enabled by default and is enabled on every port...
View ArticleAssign static IP address to MAC address in N3024 DHCP server
Hi,I've created a few DHCP scope in N3024.All these DHCP scope are working, devices able to get IP addresses.I wish some devices (e.g. printer, AppleTV, etc.) can get a static IP address from this...
View ArticleConfigure a n2024 in a DMZ and use HTTPS?
Hi I just received a Dell n2024 switch. I need to connect one port to another switch port jack that is connection to our DMZ so I can access an ESXi Server from my office I also need to connect an ESXi...
View Articledell force10 mxl switchport
Hi guys,I try to set one interface of our mxl stack in switchport mode but so far without succes this is my configuration:sever ip: 10.6.30.54 and 10.6.30.55switch configuration#show versionDell Real...
View ArticleRail Kit for N3048
After searching all over the Dell site and Google, I can't find this information. Maybe I'm just off today, but can someone give me a link to and part number for the correct rail kit for PowerConnect...
View ArticleIP ACL on a Dell N3024 switchport?
I've been tinkering around with an N3024. I have some devices that are all sharing a same VLAN and I need to restrict SSH/Telnet traffic to them. I know if you want to restrict SSH/Telnet traffic to...
View Article