Clik here to view.
Enabling SSH on N2000
Hello,I'm attempting to enable SSH/telnet management for my Dell PowerConnect N2048. Currently I am receiving timeouts when connecting to either. I've followed instructions on multiple forum posts, and...
View Articlemxl 10/40 and M6505 switches on blade servers configuration
hii have new implementation for mxl 10/40 and brocade M6505 switches on blade servers (M630, M820). as network engineer my part is configuring the mxl switches 10/40 and the brocade switch M6505...
View ArticleClik here to view.
Seeking Opinions
I got this from our infrastructure team and wanted your opinion, this is how they would like to implement this scenario, let me know what you recommend or what may be missing, thanks
View ArticleDell PowerConnect 3524 - "SW3P_callback_rx_frame - intervention arp -...
Hello everyone. At the company I work for, I am testing old switches to see which ones are good and which ones are bad. I've already labeled the switch in question as "bad" for these errors - but I've...
View ArticleCant Login to 3048s
Hi All,We had an abrupt power outage recently which killed the power to our switches. Since then I cannot login to my switches via OpenManage or SSH. We had some configurations set on the switches...
View ArticleDot1x on N1500
I have an all Dell network, using a NAC solution with dynamic vlans. I added 5 N1500 switches since the N2000 switch does well but have come up against a hard to explain problem. Clients authenticate...
View ArticleSchedule a N Series switch reload
Is there a way to schedule a reload for a NSeries Switch (2000-4000)? I've checked the CLI reference guide but don't see it in there.
View ArticleSNMP MIBs for PowerConnect X1000 Series
Hi,Where can I download SNMP MIBs for Dell PowerConnect X1000 Series switch? I'd like to use up-to-date MIBs rather than generic Dell PowerConnect MIBs.Thanks!
View ArticleN2048P Te Port Troubleshooting
We have a setup where some stacks of N2048P are connected via fiber on their Te1/0/1 ports. For whatever reason the link went down and after testing out various settings it worked again after moving...
View ArticleClik here to view.
To Denial,,,
Hello Daniel, I think you are in a whirl of your business.If you are Okay, can you help me about network setting?It's a little bit long story.At first, I'll show you my topology. As you can see the...
View Article3448
HelloI have a powerconnect 3448 and I don't know how must I configure the switch, I tried to connect to the switch by:192.168.1.1192.168.0.1192.168.2.110.1.1.1192.168.0.100And I can't access to the...
View ArticleClik here to view.
N2024 dual Vlan Switch config
Hi All, I have a N2024 series switch, - firmware version belowee-dr-sw1#show versionMachine Description............... Dell Networking SwitchSystem Model ID................... N2024Machine...
View ArticleIs there a firmware dependency in M1000e components?
Hello,I have an M1000e with 4 M6220, 2 emulex and several M610 servers installed. We are planning to upgrade the switches M6220 to the latest code (5.1.9.3, A42) from 5.1.2.3. However we want to know...
View ArticleN2024P Quality of Service (QoS) configuration at the interface for MS Lync
I need help with the final steps to configure a stand alone N2024P, I followed the QoS global configuration:classofservice trust ip-dscpclassofservice ip-dscp-mapping 0 0classofservice ip-dscp-mapping...
View Articlein-errors and host down problem
Hello,I connected a device we use as a motor control to a Dell PowerConnect 7048 and it started to report to our Check_MK server some in-errors (usually around 4%) during network activities (no errors...
View ArticleDell-34xx, Dell-35xx (cable test oid)
Здравствуйте. Ищу мибы (oid) отвечающие за значения длинны кабеля, которые можно проверить на коммутаторе с помощью команд:show copper-ports tdrили test copper-port tdr...
View ArticleN2000 bpdu autorecovery
Is there a way to enable automatic recovery for ports that go into D-Down status after receiving bpdu packets? Another vendor has something like:errdisable recovery cause bpduguard
View ArticleMLAG CORE + ACCESS STACK
Hello All,We are replacing our Powerconnect switches with N2048 for the Access Layer and (2) N4032 at the core. I have never used stacking in the past and was hope to manage the members as one....
View ArticleHelp needed with DHCP relay with VLANs
Hi guys, I've already done tons of searching in many forums but I couldn't managed to get this thing to work 100% I am probably missing something.Here is the scenario: I want to broadcast 2 SSIDs each...
View ArticleDoes the Dell S3048-ON have a web interface that allows management?
We're only able to find the web interface that displays the configuration of the switch, but we can't change it. Is it possible to edit via web interface?
View Article