Removing Powerconnect 5548p from stack
I removed a switch from a 3 switch stack and was able to configure it. How do I remove the ports from the remaining 2 switch stack?
View Articleare symptoms where Windows would not keep up, get a new/updated MAC address...
hi eveyone,on PC62xx I have an IP which would hop (sometimes, a HA) between two MACs and I have a problem with all Windows clients which insist (even after arp -d xx) on show/keeping old(even the MAC...
View ArticleDell Force10 S4810 Endless Looping
So I have a Dell Force10 S4810 switch that will not completely boot. The only thing that I can get into is the uBoot environment. I have tried TFTP booting a known good FTOS image but the same issue...
View ArticleCustom OS
This is a question about the X-series and N-series Dell switches.http://www.dell.com/us/business/p/networking-x-series/pdhttp://www.dell.com/us/business/p/networking-n1500-series/pd1. What CPU's do...
View ArticleOpenManage Network Manager with N2048
Hi,We are still in staging stage, but we have purchased N2048 stacks and OMNM 25 nodes license.Currently the OMNM is running in trial license, but we are unable to monitor the performance for N2048...
View ArticleJumbo frames PowerConnect 2848
How to set jumbo frames at a port on a powerconnect 2848 ? there is a option to enable it at "system -> Advanced Setting -> General settings -> Jumbo frames [enable] " But how can I enable it...
View Articleuntagged vlan not working IOM
Helo,We have IOM-Series-XL version 9 with SAN and LAN configured(converged). we want to communicate with untagged packet on vlan 200 server side.but we cannot, it doesnt work. Do you have a solution...
View Article(jerky) routing via PC62xx
hi there,I have a working routing to nodes in a vlan: Tnode -> Astack <= non-stack-link => Bstack -> a node in XvlanI ssh to a node in Xvlan in Bstack via Astack' Xvlan IP and it seems to...
View Article2 VLANs, 1 Port
All,Thank you in advance for taking the time to look at my post. I was wondering if anyone had a solution to a problem I am having. I have multiple PCs on a physical network that are connected via an...
View ArticleDell Enterprise Hardware & Software Updates, April 10-14
Popular DownloadsOpenManage Server Administrator (OMSA) 8.3OpenManage Essentials (OME) 2.2Support Live Image (SLI) 2.2SupportAssist 1.0Servers & StoragePERC H730/H730P/H830/FD33xS/FD33xD...
View ArticleHelp with access lists (Dell Networking N4000)
We have a N4032F and I want to create an access list but I'm having a bit of trouble with the config.So basically the architecture is described as follows:N4032F (10.16.4.6)VLAN 10 (192.168.1.0/24)VLAN...
View ArticleCheck Spanning tree status.
Hello,I having configed MST like following:-----spanning-tree mode mstspanning-tree mst configurationinstance 1 add vlan 2-4093------Q. However, when I check the spanning tree status in below, it give...
View ArticleDell X4012 connecting to laptop with ethernet
Hi,The issue i am having is when I power on the switch and connect it to my laptop it doesn't see the Ethernet connection. I have to disable the adapter and enable for it to get a signal. It seems like...
View ArticleClik here to view.
converging multiple external source vlan access ports through IPS to another...
Right now I have a configuration that works but I'm getting a couple of ARP issues between external devices so I'm looking to further segregate. I have a switch N2000 to be precise, that I have all of...
View ArticleN3000: Radius VLAN assignment
Hi,I've tried assigning a VLAN via Radius, and I don't want/need to do fully fledged EAP (802.1x) but only MAC-based auth/MAB.One of the messages I got was:Time...
View Articlekinds of Static link aggregation
I have set up an static link aggregation with a powerconect2848 and there are 3 kinds of link aggregation avaiable: Layer2, Layer3, Layer2/3. Which differences there are between them? Can someone...
View ArticleConfiguring PowerEdge M I/O Aggregator in PMUX mode - help needed
Hi All,I am new to this forum kindly help me with below issue.We brought new Dell M1000e chassis with M I/O Aggregator switches, switch1 and 2.each switch have 2 X 40 gig ports total 80 gig per side ,...
View ArticleHandling multi-tenancy
We are in the process of setting up a serviced office. It could have up to 100 customers therefore 100 separate VLANs + other management and public VLANs. These customer VLANs should not be able to...
View ArticleDell PowerConnect OIDs
Hi all. Could anyone help me please - I need temperature OIDs for PowerConnect M6220, PowerConnect M6348, PowerConnect 6248.
View Article