PCM8024-k Port-channels failing
I am seeing logs of port-channel failing on my PCM8024-k with firmware version 5.1.11.1. It happens at some random intervals and also when i ssh to the switch. can someone tell if there is any solution...
View ArticleTelnet Session
When i tried telnet to 6248 version 3.3.14 PuTTY log 2017.03.30 16:37:56 =~=~=~=~=~=~=~=~=~=~=~=Sorry, new remote sessions are disallowed by current switch...
View ArticleRegister for our TechDirect Webcast on June 8th!
Join us for Dell EMC Support's TechDirect webcast on Thursday, June 8th. Choose your session: 9-10 AM BST / 3:30-4:30 PM IST or 3-4 PM BST / 9-10 AM CDT.OverviewFrom deployment to support, the...
View ArticleProblem with latest powerconnect m8024K firmware PCM8024kv5.1.11.1a22 : CPLD...
Just a warning to others considering the latest firmware....We did the FW update and that went fine.But when we performed the CPLD update as stated in the PC 8024K upgrade PDF, but now switch hangs at...
View ArticleClik here to view.
consolidate 4 ports into a closed VLAN
Hey all.I have 4 PowerConnect 5224 switches. I'm trying to isolate traffic from a secondary NIC on four hosts. This particular switch only has 5 connections: port 23 goes to another switch, which in...
View Articleip directed broadcast
hello we have a software requirement that requires to have ip directed broadcast to be enabled on our router and we are using a dell N3048 in Layer 3 routed mode. it is our default gateway. how would i...
View Article2716: Internal fuse?
Recently moved buildings and my trusty 2716 seems to be DOA. No power up, no leds.Since there is no on/off switch just wondering if there could be an internal fuse? There is no externally accessible...
View ArticleClik here to view.
Supported switches for Storage Spaces Direct
Simple Question:Which Dell switches are supported for a Storage Spaces Direct deployment:I am looking for a basic solution, so I do not plan on doing RDMA.RDMA is not required by Windows 2016 S2D...
View ArticleBandwidth average on an interrface
Hi,I have a powerconnect 5524 and i search how to view the bandwitch use on an interface during x minutes.I know the command line : show rmon statistics and show interface counter but i prefer an...
View ArticleDell/Force10 S4048-ON LACP Port Flapping Before Reload
I have a pair of S4048 switches connected together using VLT which each have 2x uplinks to my core S6010 pair (also VLT). The servers connected to the 4048 pair do so with a link to each switch using...
View ArticleN4032 Remove all config from a port
Hey GuysCisco has a command that removes all config from a port onlydefault interface gigabitEthernetx/xDoes Dell have any thing like that ????Rob
View ArticleDell Best Practice Port Config
I have Dell switches,On trunk ports connected to VMware with about 8 vlansis there a best pratice port configuration ???On Access ports 2 vlans Data and Voice 130-Data 150-Voice is there a best...
View ArticleUpgrading firmware on the estate of 160 Dell N2048POE switches auto
Hi,Any good tips, ideas to do thisI need to update firmware 160 devices dell N2048POEsoftware ? script ?rob
View ArticleDHCP through 3 switches to Wifi access point?
Hi everyone.I have sonicwall somewhere, which is connected to a switch. This switch has a port, where you can plug in a wifi AP or a computer via Ethernet, and it will get the IP address and you can go...
View Articletype of link between switches for a vlan
hi fellas, I have a question:Should trunk type of link be used for a connection between switches (dell + non-dell) if just one vlan will be on that link?Ports should be in access mode on both switches...
View ArticleConstant Errors: N032.12-1 DRIVER[91422732]: broad_hpc_drv.c(4362) 52072...
There are a few posts about this and answer seems to be FW and a reboot.But wondered why?I have 2 stacked for iSCS traffic, we have had the setup running for a few years now but only this week we get...
View ArticleQLogic 57800 2x10Gb
Hello team, is there already any supported 10G-SFP-T transceiver modules from Dell for below Qlogic card? Can also be from another vendor.Don't ask me why Copper...
View Articlenetwork brought down by crashed pc
Twice in the last few months we've had two different machines bsod and while in that state, bring down half of our network. It's somehow flooding the switch, and the switch it's uplinked to,...
View ArticleBest Practice for N3024F Redudancy
Hi All,Currently I have one switch N3024F that works as Core Switch. Now I have plan to buy another one N3024F for redundancy. I was thinking about to Stacking or using VRRP, I dont know is my think is...
View ArticleVRTX LAG on H3C switches
Hi all,I have a VRTX server witch is connected to the H3C switches and the LAG is not working.I try several configuration on the H3C switch and on the Dell and it can only work on 1000M.I want to make...
View Article