Dell 6224 CX4 how to connect?
So I have the XFP module and the CX4 stacking module. From what I understand I can use the CX4 stacking module (reconfigure it if needed) to connect to my other 10GB network devices. I'm just not...
View Articledell switch and cisco router
i have cisco 2600 series router and dell powerconnect 6248 switch ..i create dhcp for multiple Vlan in cisco router and i want to connect that router with dell switch so how can i provide dynamic ip...
View ArticleN2048P delete PoCs
Hi there,is there any possible way to remove the empty port-channel. IMHO it is a bit weird that the switch shows 128 PoCs that are empty and not used?I.e. those show up via snmpwalksw-H4-UG(config)#do...
View ArticleOpenManage Network Manager (OMNM) Virtual Appliance - OS Image Upload -...
Running the latest OMNM and have most things working. However when trying to upload new firmware images it fails with Exception thrown. I can't seem to find where logs are stored to look through logs...
View ArticlePing loss to PowerConnect 8024F. Probably high cpu consumption
Hi all.There are ping loss, high latency to two Dell PowerConnect 8024f. Problem on two switchshave started at same time.Switchs passed traffic without problem. All hosts and switchs behind them work...
View ArticleDell N4032F L3 routing problem to upstream router
Dell N4032F L3 routing problem to upstream routerHello, i have problem with routing from my vlan to internet.switch (port 22)ip routing is enabledvlan110 192.168.110.1/24vlan120 192.168.120.1/24vlan130...
View ArticlePowerConnect 5524 lldp crash
I have two stacked 5524s running firmware 4.1.0.20.The 5524 stack has no custom configuration other than completing the easy startup wizard.Port gi1/0/13 on the 5524 stack is connected to port gi1/0/13...
View ArticleVRTX problem
Hi, When i tried to connect PE VRTX server to the core switch via a DAC cable it does not workthe core switch is Cisco, is there any compatibility issue when connecting the VRTX server to the Cisco...
View ArticlePowerConnect 2824 (2800 series) port authentication 802.1x with freeradius
We are using powerconnect 2824 for lan network. I need to run 802.1x authentication for one of its port. In my lan i have already freeradius version 3 server with configured users (for wifi). Switch...
View ArticleSmall Router and Switch for VOIP QOS
Hello,We are planning to use migrate to the VOIP and for that we want to buy a Switch (may be a Router too) for the Qos and creating VLANs, please can someone advice me for a small switch layer 3 with...
View ArticleDell N4032F Suddenly reboot
Hi Guys,does anyone know the reason of the suddenly reboot N4032F ? is it because power loss or software crash ? please advise
View ArticleDell Networking X1052 - USB console doesn't work after upgrade to...
Hi, seems USB console doesn't work after FW upgrade from version 3.0.0.82 to 3.0.0.91 on Dell X1052.I'm using Linux machine and serial/usb device doesn't show up (it was working before the upgrade...
View ArticleSmart Switch 2724
I know that this is an older switch but it works (or did).I had a switch take a dive yesterday. I hastily configured another one and this time I installed it with a public IP in the public network...
View ArticleN4032 switches and UDLD
Hi,We have a Core switch formed by two physical switches in the Stack form.We have for each floor, fiber uplinks and so, I enabled UDLD last Friday, to avoid any potential Unidirectional...
View ArticleTrying to SSH into a S60, but get error message: "no matching cipher found"
I'm trying to SSH into a S60, but I get error message: "no matching cipher found"...$ ssh admin@192.168.1.2Unable to negotiate with 192.168.1.2 port 22: no matching cipher found. Their offer:...
View ArticleWhat is the difference between the command "write" and "write memory"?
What is the difference between the FTOS command "write" and "write memory" and "copy running config startup-config"?
View Articleunrecognized command
Hi,Ive just received my first Dell x1000 series switch (x1026), and so far been happy about it.Im fairly used to basic Cisco commands, so many of the commands seems the same.When i received it i...
View ArticleInterface status is up but protocol down on DELL s6010
Hi All,i'm configuring a cluster to do pxe boot over dell s6010 switch. all the interfaces are showing up but protocol is down and machines are not able to reach management node. ports are assigned...
View Article10GbE module for N3000 series switches tech details
Hello, wanted to buy 10GbE adaptor for my N3000 stack to connect them with another floor via Fibre Optics cable. On the Dell website I only found one module compatible with those switches 409-BBCZ....
View ArticleCheck Temp for powerconnect 5324
Hello,How to I check the temp on a powerconnect 5324 through the Open Manager Switch Administrator?Thanks, Ramsey
View Article