powerconnect 7048 in a rack is it possible
HiI have bunches of powerconnect 7048 to put in rack as top of rack.But i m a bit afraid to do thatIndeed this kind of switches have only rackmount ears The switch with this two power supplies is...
View Articlevlan setup in 6224F
am totally new to setting up vlan. have the below info but am not sure how to configure. kindly advise. Management interface:IP: 192.168.50.13Subnet: 255.255.255.0Default GW: 192.168.50.2Management...
View ArticleI need the PowerConnect 3024 6.1.5 Firmware.
Can someone please email this to me. Thanks
View Articlestacking a PowerConnect 3548 and 3524
HiiI'm setting up a test lab in office and found 2 PowerConnect switches (a 3524 & a 3548)I know it can do stacking through ports G3/G4 but i can't seem to get it to work..hope someone can...
View ArticleSpanning Tree Topology Change Received: MSTID:
Hi guys I have a ten gig switch with two uplink ports in a portchannel and a seperate one as one gig to the same upstream switch. Everything seems to be working fine but i keep getting these log...
View Articleconnect m6220 stacked switches to existent Lan infrastracture
I need to connect two powerconnect M6220 to the existent lan infrastracture.The two switch are configured in stack.Which is the best way to uplink the new switch to the other two powerconnect 5548.The...
View ArticleConfiguring Active Directory Integration with a Dell KVM - 2162DS
Does anyone have any experience with this? I'm struggling to find enough information from the manual to configure this. I don't have the ability to modify active directory at all, and I'd like to...
View Articlehttps for openmanage network manager
I m trying to run openmanage network manage 5.2P1 and i would like to setup https for accessingin the docs i can readHTTPSYou can connect to application server securely by configuring the included...
View ArticleConfig Help!
Hi Guys,Was wondering if someone could help me here, a little confused on how to get this configured correctly.I have a PowerConnect 6248 which I am trying configure.I have two vlans, the default vlan...
View ArticleVLAN Access-list help
Hi, I'm trying to configure an OUT ACL in a VLAN interface (the management vlan) with a Powerconnect 8100 and I have some trouble. I want:- only one IP address access to the vlan (10.6.5.4) to manage...
View Articleuploading scripts to powerconnect 6248
Hiwe recently lost all the scripts stored on a 6248 and would like to re-upload them. how does one go about this? The cli reference manual shows some commands, but not how to add the scripts.ThanksKarl
View ArticlePC3448P EPS-470 pinout
It's just 3 pins, and I have successfully identified the +/- ones, what is the third one for? I'd like to power the switch from -48V DC telecom battery backup instead of the original EPS-470, and it...
View ArticleAuthentication error while adding a Cisco switch in Openmanage Network Manager
I am trying to get a Cisco Switch in the Dell Openmanage network manager.I am able to telnet the switch, and login is also no problem. I set up the authencation the same way as putty: ip, telnet poort...
View ArticlePowerconnect 8100 Spannig Tree with Cisco 3750
Which is the best way to deploy Spanning Tree in a network with Powerconnect 8100 Core and Cisco 3750 access switches?Thanks
View ArticleQOS Configuration
We have several 6224's running on a Layer 2 backbone provider's network. We are in the beginning stages of implementing an Avaya telephone upgrade which will require me to dig in and properly ensure...
View ArticleClik here to view.
vLANs for Public IP Assignment
Hello Everyone;Overview: My ISP provided me with more than Public IP block i.e (192.158.13.1/24, 192.158.14.1/24) that I would like to assign to my Hypervisor (Citrix XenServer) via vLAN isolation...
View Article8132F 10G SFP+ Issue with Cisco 2960 GBIC
I cannot connect my dell 8132F SFP+ to Cisco 2960 1G GBIC port.Can Any one help?As per I know, SFP+ is 10G/1G, so I should be able to connect the switches, right?But every time i connect the module,...
View ArticleDHCP Relay 62xx Switches
I have three 62xx (2-6248 and 1-6224) switches that serve as my core network. Each switch is in a different building or different floor and they are connected using CX4 or XFP 10GB links. I am new to...
View ArticleHow to modify the time that stacks convergence on Dell PowerConnect 8164
I've create a stack between two Dell PowerConnect switches 8164.But i want to know if i could modify the times it takes to converge the converge time between them, i mean...i remove all the cables of...
View Article