Monitor port not seeing all traffic
Hello,I have a PowerConnect 3548 that I want to set up to monitor one of the ports however when I set it up the only traffic I see on the monitor port is arp traffic. My set up is as follows:port to...
View ArticlePC8132 - confused by switchport setting
Hello all,I initially configured the switch such that the ports were set to access mode.Subsequently, we decided to set them to trunk mode.When checking the switchport settings (see below for example...
View ArticleClik here to view.
anyone know how to resolve this issue?
Hi everyone ,I`m trying to reload my powerconnect 5548 , but the system shows this error and stop . Anyone can help me?or Who can explain this issue?
View ArticleDell PowerConnect 6248 need help with temperature OID (two 6248 in stack)
Hi, Ifound theodifor temperaturein6248,but this isonly for theunit 1of the stack,anyone knowshow I cangetthe temperature of theunit 2.thanks a lot,1.3.6.1.4.1.674.10895.5000.2.6132.1.1.43.1.8.1.0 (this...
View ArticlePowerConnect 6248 snmp support
Anyone know if there are plans to expand the OIDs supported for the 6xxx series? Specifically I am interested in ipNetToPhysicalTable - 1.3.6.1.2.1.4.35Thanks,Scott
View ArticleQuestion about Powerconnect M6220 and 8024-K out-of-band/management connection
I'm sorry if this question belongs in another section but as it relates to the functionality of these switches I thought I'd start here.My question is, does the M6220 and 8024-K out-of-band connection...
View ArticlePowerConnect 6224 - Trouble with vlans
I am new to PowerConnects so I'm not sure if I'm missing config steps. I am having problems getting devices to ping/communicat to each other. I have 2 powerconnects, both are 6224 model.I created 3...
View ArticleWeb management Dell Force10 S Series S55
Hi there,I would like to know if there is a way to enable web management on a dell force10 S55 switch.Thanks.
View ArticleClik here to view.
prioritize taffic for H.323 video
HiI'm wondering how to configure a PC6224 and PC5548 to prioritize traffic for H.323 video conferencing. The H.323 traffic comes and goes from the Cisco 3825 router that is handle by our ISP. It is...
View ArticleDot1x violation mode
Hi everyone.I've got an issue about dot1x configuration with PowerConnect 5548 switch.I configured a port like that :interface gigabitethernet1/0/4 dot1x host-mode multi-sessions dot1x reauthentication...
View Articlepowerconnect 8100 , FCoE support
Hello!I'm complete newbie with FCoE, so, please, excuse me for this question.Could you tell is DCB support in 8132 specs means it is suitable for FCoE?Thank you!
View ArticleACE for internet access on a single VLAN (6224-NSA2400)
So VLAN routing is cruising right along... pretty zippy too I might add.. Love the speed of the 6224. everything on the network can ping too! okay for now, but not for long. in restricting the traffic...
View ArticleLinux bonding issues on stacked 6248
Have setup 4 Linux hosts with several bonded pairs spanning between two stacked PowerConnect 6248s and I seem to be having issues with packet loss. I have configured the majority of the bonded NIC...
View ArticleClik here to view.
Creating VLANs between Powerconnect 5548 and F10 s4810...
In the next few months we'll be replacing our network gear. I was able to get my hands on the new gear early, and though I'm not traditionally a network guy, the project has been given to me, and I...
View ArticleSTP between 2824 and 6224
I am trying to get STP working between a 2824 and a 6248.The 2824 mac address is lower, so when the priority is the same, the 2824 configures as the root, and everything works.However, when the...
View Article3548P changes not saving
Hi all,We just bought a PowerConnect 3548P. I configured an IP address, user name and password on it through console then configured it using web console. I unplugged the power afterward. I found all...
View ArticlePC5324 protocol groups / protocol VLAN bug
I'm running a small local WISP. I have a few of these switches bought at auctions (allegro.pl - a bit like ebay), they generally work fine but I came across a strange issue with a nice but rarely used...
View Articledell p/n u691d compatible short and long range tranceivers?
hi everybodyis there a list of compatible parts?maybe you can confirm by having such a tranceiver tested?regards
View Articleno links in network map in openmanage network manager
HiI have just installed openmamange network manager and i discovered 5 switchs.I ran link discovery but on the network map my switches are not connected :(Is there an other way to have a map of my...
View Article