Add a VLAN to a channel-group on 62xx switch...
Greetings; We have a 4-member Channel-group configured between a 6248 switch, and an M6220 blade-switch in the back of an M1000 chassis. I need to add a few VLANs to this 'trunk' so-to-speak, but...
View ArticlePowerConnect 6248 Switch Config Review - Enabling VLANs and supporting VOIP
Hello Everyone,I am in the process of redoing our switch configuration to support our new VOIP solution as well as increase our IP count based on computing type. Would like to hear from all of you to...
View Articleip acl switch n3048
HelloI have problem with ip acl on dell networking n3048.I need to allow comunication only one way examplehost A (1.1.1.10) can connect to host B (1.1.1.20), but host B can't connect to AHost B is plug...
View ArticlePowerConnect 6248 and VLANs
I've read many a thread about setting up VLANs on my PowerConnect 6248s. Up until this point, I have had one big flat network (no VLANs) and all routing is happening through my Barracuda Firewall.My...
View ArticleForce10 S25n - Is 8.4.2.7 truly the latest version of FTOS available?
According to the Force10 support site it is not supported as of June 2015. Does this mean there is currently no supported FTOS for my switches? The next scheduled release is "To be announced." When...
View ArticleSetting up SNMP on 3548 Stack don't work
Ive Setp SNMP on 3548 Stack, as management stations is Microsoft System Center Operations 2012r2 but I don't receiving any response
View ArticleValidation for Force10 S4810 VLT Domain and Intervlan routing
Hi Sir/MamI just want to validate if this okay only 1 default gateway in both secondary and primary vlt for my S4810 Core SwitchesCurrent Configuration ...! Version 9.8(0.0)! Last configuration change...
View ArticleStacking S4048-ON switches with fiber?
I'm trying to stack two S4048-ON switches with fiber with no luck.I can get link between switches with 1GBase-LR and 40G-LR4 optics but when I configure ports as stack-group theres no link anymore. I...
View ArticleMXL switches and M1000chassis management ips
Ok having an issue that I can't seem to wrap my head around. Does the management interface for the MXL switches in a M1000 chassis go out the management interface of the chassis or the general ports on...
View ArticleDell 8024F SR SFP+ compatability
We have a couple of 3rd-party 'compatible' SR transceivers that only operate when switch port is set to 'stacking.'When set to 'ethernet' the 8024F no longer recognises them.In neither case are we able...
View ArticleManagement access to PowerConnect 3548 from remote network segments
I am having a problem accessing the remote PowerConnect switches we have at out remote sites or my home office when I am connected remotely.My power connect switches are configured with multiple vlans...
View ArticleDifference of S4820T VLT Capability vs S4810 VLT
Hi DellCan I ask what the primary difference between S4820T and S4810 with it comes to a vlt Im sure that S4810 has a active active connection with it comes to a vltbut when S4820 is it active active...
View ArticleTO MANY spanning-treee topoloy change
i HAVE AS MAIN SWITCH N 3048(root switch) AND POWERCONNECT 3548 in stack of 5 switches and powerconnect 5448 as vm switch,at the moment spaning tree is constantly changing , without plugin...
View ArticleN2048 stack firmware update error
I have 27 Dell N2048 switches in the network and recently upgraded the firmware on one stack in response to a memory leak error. That switch lost all the configuration on the second member of the...
View ArticleExtend HDMI uplink and downlink for Powerconnect 55xx stack using fiber optic...
We wish to deploy a PC 5524 switch in the plant and add it to our existing 5 unit PC 55XX stack. The distance is around 300 feet. Our research has disclosed that the only possible way to do this with...
View ArticleAdding new VLANs via CLI (PowerConnect 62xx series)
I've got a pair of 6248 switches that are stacked. The stack has 4 VLANs known & active right now, but I need to add 2 more. Based on my reading, I would do the following?Current:configurevlan...
View ArticleHow do I remove Dynamic Vlans on a Powerconnect 6224
Greetings allI have recently started at a new site and am in the process of cleaning up the network. I have a Dell Powerconnect 6224 that has 4 dynamic vlans that need to be removed, can anyone point...
View ArticleHow to download crashlogs from a 8132F
Hi, I want to investigate why the Switch rebooted. The system log states "4 Crashlogs found".I can see a Directory named "crashlogs" when using #dir, but I don't know how I can open that directory. How...
View ArticleiSCSI and MLAG
hi there,We have 2x 4064 switches linked via mlag.I was wondering if its ok to connect an equallogic to these - i.e. is iSCSI supported (or recommended) in this setup?Thanks,Huw
View ArticleClik here to view.
N4032 QSFP ports in a LAG
I've got (2) N4032's in a 40GB stacked configuration using the 2 port QSFP cards in each. I'm connecting port 1/1/1 to port 2/1/2 and 1/1/2 to 2/1/1 respectively. The units stack successfully, but...
View Article