Port-Channel/Redundant links
Hi all,Our company is in the middle of standing up a SAN between two colocation facilties. The two facilities will be connected via two layer 2 private leased lines, each side with a two member Dell...
View ArticleDell Networking N3024 Gi1/0/10 is transitioned from the Forwarding state to...
In myDell Networking N3024ORACLE port is transitioned from the Forwarding state to the Blocking state in instance 0How to resolve ?????????? Thanks !!!!NoticeJan 13 00:55:40TRAPMGRGi1/0/10 is...
View ArticlePC6248p - How to protect core switch's IP address? DAI?
Hi,I recently had a situation where we had an apparent network outage which manifested itself as all external links went down which implicated the core switch, which also performs all required...
View ArticleDis-ableing and enabling port commands
Hello All I'm new to dell switches as I come from a cisco environment. can someone tell me the commands on how to dis-able and enable ports on a powerconnect 5548.thank you Ralph
View ArticlePowerConnect 5424 erase file system
I need to erase the file system on our 5424 to remove the ssh keys, certificates, etc. When I try and use the Advanced option in the Boot menu (ctrl-shift-6) I get prompted for a password. What is...
View ArticleConnecting Multiple 6248's
Good morning all!I currently have 2x PC6248's that are stacked with YY741 stacking module and 2x Dell F4XF-F4XF 1 meter cables between them and it's all working fine. # show stack-port indicates that...
View ArticleConfusing Config and Routing
I have a L3 switch (PC6224) that I am using for a proof of concept configuration. My native/default VLAN is 192.168.12.0/24. I also have available 10.1.100.0/24(VoIP devices),...
View ArticleConnecting Dell M630 10G LOM with Cisco 2960X-24TS-L (10G SFP+ to 1G SFP)
Dear All,Hope you are doing fine. I have a Blade Chassis with 10G Pass through in Fabric A1/A2, 2 Blade servers which are running on Oracle Linux 7.2; and an external switch pair Cisco 2960X-24TS-L...
View ArticleDoes Dell 8132F support PBR?
Hello,I advise does 8132F support Policy Base Routing function? Thanks!
View ArticlePoint to point fiber between powerconnect switches
Hi,We've had a fibre line installed at one of our client offices to join a satellite office to the main office. The fibre line runs between two presentation panels and then into a fibre transceiver...
View ArticleN4032 login authentication using RADIUS (Windows Server 2008R2)
I'm having trouble getting authentication working. All of our Cisco switches are working and these are our first Dell switches.The OOB port on the Dell switches are connected to a management network...
View ArticleDell Force10 S4810 VLAN Mirroring
Dear colleagues,I was wondering if you have experience with port-mirroring over VLT in Dell Force10 switches and if it is possible.I've been searching for information in the past week and couldn't find...
View ArticleClik here to view.
Set vlan priority when voice vlan is enabled.
I have a core 6224 connecting a group of 5524 switches. We have Voice Vlan enabled for our ShoreTel VoIP system. My understanding when Voice Vlanins enabled that all voice traffic has priority over...
View ArticleDiscards Issue
I have a N3048 STACK . I have an environment that has this stack behind a firewall. The issue is I have a station on this switch which has no routing enabled just an address on the switch for...
View ArticleOpenSSH Vulnerability
A flaw in OpenSSH discovered which could potentially allow an information leak (CVE-2016-0777) or buffer overflow (CVE-2016-0778) via the OpenSSH client.Do we need to worry about this flaw since Dell...
View ArticleN4032 LAG between 3 switches
Hello,I 've been searching to find a documentation on how to properly connect/config 3x N4032 switches in a LAG configuration and not in stack.Unfortunately I haven't found anything so far.Has anyone...
View ArticleStacking a PowerConnect 3424
Hi everybody,I have a 3424's stacking and the question is:The unit 3 is wrong?, I mean, there is some problem about this unit? or is normal that is unit have been disabled the master:Unit MAC Address...
View ArticleHow to connect two Force10 S4810P network switches
Hi everyone,We have just bought two Force10 S4810P network switches and we want to install them on two adjacent racks. They will be used to interconnect compute and NAS storage installed across both...
View ArticleVLAN not connecting to Internet - PowerConnect 6248
I have the following VLAN's:VLAN1 192.168.10.1 VLAN50 192.168.50.1VLAN100 (management)I'm able to ping from VLAN1 to 50 and from 50 to 1. VLAN1 uses 192.168.10.2 to go out to the internet. I can ping...
View ArticleDell FX2 FN 410S IO Aggregator mgmt issue when vlan 1 is allowed on trunk port
New to the FN 410S IOA but I've noticed that I set a management IP on IOA A1 if 10.1.0.103 and A2 to 10.1.0.104. I connect a fiber optic cable from an SFP on port 9 from A1 to a 10gbps port on Cisco...
View Article