Switch with MTU size 12k
I am looking for switch with 48 1 Gbit/s ports and 4 SFP+ ports. The switch must have support for jumbo frames 12k. All switches I have looked have only 9k jumbo frames.Can anyone help me?Thank you!!!
View ArticleARP Table not showing all ports
I have a Dell powerconnect 2848 plugged into a port on a dell n3048. I have the mac address of the 2848 but not the IP. When I look at the arp table on the 3048 it does not display the 2848 plugged...
View ArticleN2048 - VoIP QoS , Data Ports and Trunk Configurations
Hi all,I am new here and also new to working with Dell Networking equipment. I just need some clarification of the configuration of a new network I am setting. We are using 3 N2048 switches for access...
View Articlereverse airflow for powerconnect 8100 series
HiDell has sold to use several 8100 switches to act as top of rack.my problem now is that the airflow is not on the good way.i would like to reverse the air flow but i didn't find any way to do...
View ArticleTrying to setup a port channel to connect a new switch with ports that were...
i have s60 switches stacked. FTOS version 8.3.3.7I'm trying to add a 2 interface port channel, nothing fancy, but i keep getting errors due to the switch already being configured as a switch port on a...
View ArticlePowerConnect 3324 - ComboC port does not switch to ComboF when Dell SFP...
We have a Dell 3324 with Dell Transceivers (1000BASE-SX SFP) that is not switching the g1 combo port from ComboC to ComboF when the transceiver is inserted. The RAM log files say the following "Port...
View ArticleNetwork link issue VRTX
HiWe have a problem when connecting the ports of Pass-Thru Module to a "switch cisco 2960S", the server (windows 2012 R2) gives an error "Network Cable Unplugged" on both cards, and no Network link in...
View ArticleN2000 (6.1.1.7) port security
Dear Expert, We are using N2048, which firmware 6.1.1.7, and would like to apply port security to limit the mac address to one. We connect one PC to this port only. However, the PC cannot connect to...
View ArticleN3000 (6.1.1.7) igmp snooping issue
G'day!I'm setting up a new N3048P switch and having a weird issue with multicast packets being flooded to all ports in the Vlan ONLY when there is nobody joined to that multicast group, ie. 'show ip...
View ArticleMIB for Switch PowerConnect 6248
Hi,I need MIB for switch powerconnect 6248 for Systrem Center Operations Manager 2012 R12
View ArticleOOB Management Unreachable - Dell M6220
Hi,I have a Dell M1000e blade chassis containing 2x M6220 switches (Fabric A 1 & 2). Recently I thought I'd upgrade the firmware as they were both on a very old version. Following the...
View ArticleDell PowerConnect 6248 Problem
Hello. I got a new Dell PowerConnect 6248 switch. I'm trying to log in to the switch; I get the log in screen but pressing “OK” after entering the username & password does nothing. What could be...
View ArticleOMNM 6 not free for 10 devices anymore, any mirrors for 5.3 SP2
Hi, even tho your training (DAN0214WBTT & DOSS0414WBTT) suggests OMNM is free for 10 devices, 6.0 version is not. Any link available for version 5.3 SP2?Thanks,
View ArticleHow to set up Radius Authentication on N-Series switches
Hi,I am new to the N-Series platform (and power connect, for that matter) and am trying to set up Radius authentication on an N2024 switch but have had no success. I can ping the Server, but the...
View ArticleN3024P - VLAN routing issue
I have a single Dell Powerconnect N3024p it is configured in L2 mode and is configured with 3 VLANS. VLAN 1 the default is configured on ports 21 - 24, Vlan 10 is configured on ports 1-14, and VLAN...
View ArticleDell Openmanage Network Manager (ONM) not displaying performance indicators...
Hello,I am having issues with Openmanage Network Manager not displaying CPU and memory utilization for any of our switches. I have tried with 5.3 and also version 6 and have the same results. I'm...
View ArticleDell PowerConnect 7048Pdefault password
We have got dell Power connect 7048 P switchI have connected it to system and connecting to it via hyperterminalWhat is the default enable password for the switch ?I tried admin and admin123 and...
View ArticleDell Force10 S50N Uplink Configuration Question
Hi Guys,I'm wondering - I have a Dell Force10 (S50N) which I'm using as a core colo switch on an L2 network (I'm being routed to). However, while I can access the switch just fine via in-band methods...
View ArticleConnect Powerconnect M6348 with Powerconnect 2748
HelloWe have bought some M1000e with M610 blades, each og the chassis has two M6348 and M6220 (Not yet stacked)On our powerconnect 2748 we have two vlans today, vlan 1 and vlan 150. These vlans are...
View ArticleRemote Management hangs over inter VLAN routing
Hi all,I have several 6224 and 6248 switches in a stack. They have 3 VLANs setup - 10 the management VLAN, 20 the server VLAN and 30 the client VLAN.If I manage the switch via a direct console cable...
View Article